ANK1 (W) 65 (80.100) x21 (14.35) K1 (K2) M1-KU-R

TU 3665-009-4965 2808-2004

АНК1 (Ш) 65х21 (14,35)К1(К2)М1-КУ-Р

The set is designed for sealing the injection wellhead, regulating the mode of their operation.

The kit is equipped with reliable, easy-to-operate and highly hermetic disk valves. The lack of free volume in valves of this type excludes the possibility of water ingress and freezing in the valve body. The alloys and materials used provide high wear and corrosion resistance.

At the request of the customer, the equipment can be equipped with both a choke valve ZDSh 65-210M and a full bore ZD 65-210M.

The climatic version of the wellhead fittings is UHL1 (HL1) in accordance with GOST 15150-69.

The limiting values ​​of the operating temperatures of the ambient air are from +40 to -60 ° С.

By agreement with the customer, any design and configuration options are possible.

Схема АНК1 (Ш) 65х21 (14,35)К1(К2)М1-КУ-Р 1. Column flange

2. Pipe head

3. Sub

4. Gate valve ZD 65-210M

5. Gate valve ZDSH 65-210M

6. Flange

7. Flow sensor PPRE-65 (32) x21

8. Shut-off device

9. Counter flange

10. Check Valve

11. Throttle angle DRU

12. Bypass valve

Specifications
Working pressure Pn, MPa (kg / cm²)

14(140), 21(210), 35(350)

Nominal bore Dn, mm Tree trunk

65, 80, 100

Side  track (lateral outlet)

50, 65, 80, 100

Side  track (lateral outlet) of the pipe head

50, 65

Connecting thread To tubing (lift) pipes NKT73, NKT89, NKT102, NKT114 GOST 663-80
To casing pipes * Obs. 146, 168 OTTM 146, 168 GOST 632-80
Resistance to downhole environment K1, K2 GOST 13846-89
Working environment temperature, ° C No more than 120

* by agreement with the customer, fittings with a different type of thread or flange can be manufactured in accordance with GOST 28919-91